Use your HAI OmniLT, Omni II or OmniPro II automation controller to control all of the UPB-connected lighting in your home. The HAI UPB Powerline Interface Module connects to your automation panel with the included cable, letting you transmit and receive signals over your powerline using the highly reliable Universal Powerline Bus (UPB) technology. HAI control panels are sold separately. Using an adapter (sold separately), you can connect the Powerline Interface Module to your PC for PC programming of UPB devices. Plug the HAI UPB Powerline Interface Module into a standard 120V AC outlet. Insert one end of the 6-conductor modular cable into a serial port on your HAI controller and insert the other end into the interface module. The status light on the module gives diagnostic information, showing transmitted and received signals. UPB technology delivers exceptional reliability and noise immunity at a much lower installed cost when compared to hardwired and RF solutions, and you'll experience no interference from adjacent homes. UPB technology is not X10 compatible.