The Smarthome Manager PLUS software suite is an innovation that allows for seamless home automation management or monitoring. When coupled with Smarthome Design interface device, such as the Smarthome PowerLinc Controller USB, Smarthome Manager PLUS provides total home control. Smarthome does not accept returns on any opened software. Timed Events - Can be based on the same time every day, sunrise/sunset, and randomized for security purposes Celestial Clock - Tracks sunrise and sunset times for any place on the planet Macro Triggers - Allows one incoming signal to cause PowerLinc controller to send a series of commands to your receiving modules Unique Commands - Such preset dimming, On-Only, Off-Only, etc. Location Selection - Setup controlled modules by room, sections, or the entire home Master Reference List - Catalog all controlled devices and scene addresses Setup Wizard - Intuitive setup wizards that accommodates all technical users Network Monitoring and Logging - Easily monitor and log all sent and received PLC/X10 signals The Smarthome Manager PLUS software runs on computers that use Microsoft Windows® 98se, Windows 2000, and Windows XP Home and Professional, is not compatible with "server" platforms such as Windows 2000 Server or NetWare. In addition, Smarthome Manager PLUS utilizes Microsoft's Human Interface drivers that are already located on all Windows based systems, therefore the end user will not have to install any additional drivers or worry about conflicts with other hardware or software programs or devices. We recommend a computer with a minimum of 300MHz processor, 32MB of RAM memory, and at least one USB or COM port, depending on the type of network interface device used. In addition, the computer must have a CD-ROM drive in order to load the software. If you do not need: 2-way communication 2-way X10 monitoring Ability to copy existing setups Then Smarthome Manager Essential should be sufficient for your needs. Some Windows Millennium (Me) users have reported problems with Smarthome Manager PLUS. We suggest downloading the Smarthome Manager Essential (14.4MB) software and installing it on your system. If the software runs when launched on your Windows Me computer, then it should work for you.