Product Details
The Minuteman Entrust Series UPS is an exciting new UPS line that provides users all the features, usually available in higher-priced UPS products, to protect your valuable equipment, offering voltage regulation, spike and surge protection and battery backup.

Each unit has four outlets that provide backup battery support along with spike and surge protection. There are an additional four spike and surge protected outlets for accessory devices that don?t require battery support. In addition, two of the outlets are specifically spaced to support equipment with transformer blocks.

The small, uniquely designed, footprint of the Entrust UPS is ideal for placement on or under a desk. All models in the Series can also be installed vertically on a shelf in a rack or cabinet installation.

Additionally, Entrust UPS products come with all the award-winning service and support capabilities offered by Para Systems, Inc., including a three-year limited warranty, (two-years on the battery), and a $75,000 Platinum Protection Plan (USA and Canada only).

Specifications

Maximum load (VA/Watts) - 1500VA/900W
Battery rating - (2) 12V/9AH
Unit weight (lbs.) - 29.33 lb (13.1kg)
Input capacity - 12 Amps
Unit dimensions (H x W x D) - 10.8 x 3.43 x 16.4 in (274.4 x 87 x 412.5 mm)
Topology - Single boost/buck line interactive, simulated sine wave
Warranty - (USA and Canada only) 3-year limited warranty, Platinum Protection Plan 2-year warranty on battery
Number of phases - Single (2W + G)
Input voltage (Acceptable input voltage) - 120VAC (0 - 160VAC)
Input voltage range (Normal mode) - 90 - 150VAC
DC start capability - Yes, (defaults to 60Hz)
Power cord - NEMA 5-15P on a 6-ft. power cord
Surge energy rating - 320 Joules
Let through - 5%, 6kV ring wave ANSI C62.41-1991 Cat 3
Response time - 0 ns normal mode, < 5 ns common mode
AC leakage current - <1 mA
Load power factor - 0.6
Output frequency - Same as Input
Short circuit protection - Re-settable circuit breaker and electronically limited
Overload capability - 110% - 5 minutes ≥120% - immediate shutdown
Output voltage regulation - 120VAC: -12.5% to +8.4%
Waveform - Same as Input
Boost mode voltage(Buck mode voltage) - Nominal +16% (Nominal -14%)
Line mode voltage range - 105 - 130VAC
Efficiency - Normal mode > 90%
Output voltage - Nominal 120VAC
Waveform - Stepped sine wave (simulated sine wave)
Battery mode voltage regulation - Nominal ? 6% until LBW
Transfer time - 6-10 ms
Output frequency & regulation - 50/60Hz ? 0.5Hz (Unless synchronized to utility)
Battery runtime (full load/half load) - ≥ 2 minutes / ≥ 9 minutes
Short circuit protection - Active electronic (current limit)
Replacement - Hot swappable
Recharge time - 8 hours to 90% after full load discharge
Operating temperature - 32?F to 104?F (up to 5,000 ft above sea level (0?C to +40?C (up to 1,500 meters above sea level)
Operating elevation - 32?F to 95?F (5,001-10,000 ft above sea level (0?C to +35?C (1,501 to 3,000 meters above sea level))
Storage temperature/ Relative humidity - 5?F to 113?F (-15?C to +45?C) / 0 - 95% non-condensing
Line protection (data/phone) - Single line input/output (RJ-45/RJ-11)
Outlets - 4 - surge only outlets 4 - battery & surge with (2) transformer blocks
Monitoring software - Includes SentryPlus software
Communications - USB
Safety and environment - UL1778, cUL (CSA 22.1), CE, FCC Class B RoHS