PowerLinc Modem - INSTEON Serial Interface (Dual-Band)

Easy, trouble-free serial connection
Powerline interface uses simple RS-232 commands, allowing any device with a programmable serial port to send INSTEON commands
Supports INSTEON extended messages
Supports 1,000+ links
Built-in dual-band technology sends and receives INSTEON RF signals
Essential Info
The Serial INSTEON PowerLinc Modem is a serial-based home automation interface that allows PC- and hardware-based automation controllers to control INSTEON-compatible lights, appliances, heating/air conditioning systems and alarm systems directly via the INSTEON network. This home automation interface uses simple RS-232 commands, allowing any device with a programmable serial port to send INSTEON commands easily, making controllers such as SimpleHomeNet's and Universal Devices' IP bridges instantly INSTEON compatible. The dual-band interface sends and receives both powerline and radio frequency (RF) INSTEON signals, so it doubles as an Access Point. This makes it ideal for new INSTEON installs and if have or plan to use an RF-only INSTEON-compatible remote, thermostat, motion sensor and contact sensor. The RF signal can bypass electrical noise or attenuation near the PC and it pulls many of the "distant" INSTEON devices one hop closer, which can expand the size of potential installations into even larger homes and commercial buildings.

New features as compared to the PowerLinc - INSTEON Modem, Serial:
Built-in Dual-Band with RF function, acts like an Access Point for phase bridging and RF to/from power line

1023 links (compared to around 800 links previously)

Added a beep sounder

Red/Green LED light

Supports faster reading and writing of the PLM's database by another controller

Much lighter weight

No pass-through outlet
Please Note: The controller connected to the Serial INSTEON PowerLinc Modem must remain powered on and running the controller program connected to the controller or host at all times of usage. Additionally, the dual-band interface does not supply power to external devices (previous versions 2412S and 2412U do)

Ideal for Developer Use
Hardware developers with products that include RS232 ports can use the Serial INSTEON PowerLinc Modem to send and receive INSTEON communications. This relieves developers from embedding INSTEON chips inside their devices and provides a quick way to market without having to go through electronics re-designs or costly safety agency approvals. It also provides electronic TTL lines for direct connection to systems with embedded processors.

Please note that developing application and controls for the PLM is not for the casual home automation enthusiast. Due to the nature of this product, Smarthome's technical support staff cannot offer programming support for developers. We cannot assist in the troubleshooting or development of applications and/or code.

Overview
Easy, trouble-free serial connection
Powerline interface uses simple RS-232 commands, allowing any device with a programmable serial port to send INSTEON commands
Supports INSTEON extended messages
Supports 1,000+ links
Built-in dual-band technology sends and receives INSTEON RF signals
Essential Info
The Serial INSTEON PowerLinc Modem is a serial-based home automation interface that allows PC- and hardware-based automation controllers to control INSTEON-compatible lights, appliances, heating/air conditioning systems and alarm systems directly via the INSTEON network. This home automation interface uses simple RS-232 commands, allowing any device with a programmable serial port to send INSTEON commands easily, making controllers such as SimpleHomeNet's and Universal Devices' IP bridges instantly INSTEON compatible. The dual-band interface sends and receives both powerline and radio frequency (RF) INSTEON signals, so it doubles as an Access Point. This makes it ideal for new INSTEON installs and if have or plan to use an RF-only INSTEON-compatible remote, thermostat, motion sensor and contact sensor. The RF signal can bypass electrical noise or attenuation near the PC and it pulls many of the "distant" INSTEON devices one hop closer, which can expand the size of potential installations into even larger homes and commercial buildings.

New features as compared to the PowerLinc - INSTEON Modem, Serial:
Built-in Dual-Band with RF function, acts like an Access Point for phase bridging and RF to/from power line

1023 links (compared to around 800 links previously)

Added a beep sounder

Red/Green LED light

Supports faster reading and writing of the PLM's database by another controller

Much lighter weight

No pass-through outlet
Please Note: The controller connected to the Serial INSTEON PowerLinc Modem must remain powered on and running the controller program connected to the controller or host at all times of usage. Additionally, the dual-band interface does not supply power to external devices (previous versions 2412S and 2412U do)

Other PowerLinc Options:
PowerLinc Modem - INSTEON Serial Interface (Dual-Band)
PowerLinc Modem - INSTEON USB Interface (without Dual-Band)*
PowerLinc Modem - INSTEON Serial Interface (without Dual-Band)*
The interfaces without dual-band technology only send and receive INSTEON powerline signals, they do not send and receive INSTEON radio frequency (RF) signals.

View our Videos:

Smarthome Home Tour
Important Note: This PowerLinc interface is not compatible with HouseLinc 2 Desktop Software. A HouseLinc 2-enabled interface is available with HouseLinc 2 - INSTEON Desktop Software in Serial (without Dual-Band), USB (without Dual-Band), Serial (Dual-Band)* or USB (Dual-Band)*.
* The dual-band interface included with these HouseLinc 2 kits sends and receives both powerline and radio frequency (RF) INSTEON signals, so it doubles as an Access Point. Additionally, these dual-band interfaces do not supply power to external devices; the interfaces without dual-band do.


Manuals/Software
Quick-Start Guide
What's Included
PowerLinc Modem - INSTEON Serial Interface (Dual-Band)

Quick Start Guide

DB-9 Serial Cable - for connecting to a computer

More Info
Ideal for Developer Use
Hardware developers with products that include RS232 ports can use the Serial INSTEON PowerLinc Modem to send and receive INSTEON communications. This relieves developers from embedding INSTEON chips inside their devices and provides a quick way to market without having to go through electronics re-designs or costly safety agency approvals. It also provides electronic TTL lines for direct connection to systems with embedded processors.

Please note that developing application and controls for the PLM is not for the casual home automation enthusiast. Due to the nature of this product, Smarthome's technical support staff cannot offer programming support for developers. We cannot assist in the troubleshooting or development of applications and/or code.

If you are interested in developing software for the PowerLinc USB or for more information about becoming an INSTEON developer please click here.

Advanced support for INSTEON developers is sold separately; click here for more information.

PLC/PowerLinc Modem Comparison

Feature Power Line Modem PowerLinc Controllers
Downloading to the unit No Yes - software dependant
Internal real-time clock None Included
Status of connected controller Must remain on and running If downloading is support, may turn off computer
Supports HouseLinc Desktop No Yes
Requires Application-layer driver like Smarthome Device Manager No Yes
Requires downloadable SALad Core application No Yes
INSTEON Extended Messages Supported Not supported


X10 Compatible
The Serial INSTEON PowerLinc Modem is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that it can respond to X10 commands from an X10 controller and it can send X10 commands to X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.

Safety Tested and Factory Certification
All SmartLabs Design products rigorously tested and safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind the entire SwitchLinc V2 line of products with a full 2-year warranty.


Specifications
Specifications

General

Brand: Smarthome
Manufacturer: SmartLabs Design
Manufacturer Product No.: 2413S - PowerLinc Modem - INSTEON Serial Interface (Dual-Band)
UPC: 718122390717
Patent No.: U.S. Patent No. 7,345,998, International patents pending
Software: Sold Separately
Status LED: Green/Red LED
Warranty: 2 years, limited
Operation

Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order: INSTEON, X10, INSTEON cleanup
Interface

Connector Type: RJ-45
Interface: RS-232 & TTL
Baud Rate: 19,200 Kbps
INSTEON Features

INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
INSTEON Links: 1,023 out of 16,777,216 possible
INSTEON Device Category: 0x03 (Network Bridges)
INSTEON Device Sub-Category: 0x11
INSTEON Power Line Frequency 131.65 KHz
INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level: 10 mV
INSTEON Messages Repeated: Yes
Mechanical

Operating Conditions: Indoors, 40 to 132 F, up to 85% relative humidity
Dimensions: 3.9" H x 2.6" W x 1.5" D
Weight: 4.0 oz
Electrical

Supply Voltage: 120 Volts AC +/- 20%, 60 Hertz, single phase
Surge Protection: MOV rated for 150 Volts
Pass-Through Outlet: No
Certification: Safety tested for use in USA and Canada (ETL #3017581)
X10 Features

X10 Scene Addresses: 256 possible
X10 Controllable Addresses: 256 possible
X10 Powerline Frequency: 120 KHz
X10 Minimum Transmit Level: 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level: 20mV into 5 Ohms
X10 Messages Repeated: No